The First class is primarily demonstration and some cuttlebone prep. • Cuttlebone*: 8” to 10” size at least 2 (they are very fragile and easy to break) • semi stiff small paint brush for dusting • Mask (optional-but recommended) • small can of pressurized air (as used...

Note from Patsy: All previous students must have color plates completed prior to our workshop. A single color plate will consist of 6 colors in each family of colors. To clarity, a plate of blues with have six colors of blue, dark to light.   I request all students...

Materials fee $40.00 (to be paid to the instructor the day of the workshop, check or cash), includes: Aura 22 23.5kt gold foil  (for Keum-boo) Enamels and Klyr-fire Students should bring: 1 – 45 gram package PMC+ clay (a 28 gram  package will make 1 bracelet or 15...

Cuttlebone*: 8” to 10” size at least 2 (they are very fragile and easy to break) semi stiff small paint brush for dusting Mask (optional-but recommended) small can of pressurized air (as used for cleaning computers) Sharp tools for scraping designs ( wax working tools...

1 Optivisor with an attached 10X loop 1 Plastic apron 1 Set of ear plugs 1 Pair of safety glasses 1 Particle mask 1 Old dish towel Note: Wear old clothes! Students will be working on clear quartz to begin with, which the school will supply. $20.00 studio...

Small compartment paint tray Notebook Newsprint 1 small paint brush 1 medium paint brush Small jar for cleaning brushes in water (4-8 ounces) Pointed tweezers Cotton apron Dust mask Safety goggles Included in student kit (purchased from instructor on day of class): 2...

Pencil and paper for notes and sketches Clear “good quality” packing tape Scissors X-acto knife Sharpie-type marker Jeweler's saw frame Saw blades: 2/00 or 3/00 (if you have other sizes you may also bring them) the school will have some available for sale also Jewelry...

Required tools and supplies: (1) 45 gram package PMC+ clay $25 materials fee to be paid to instructor day of workshop for the rental of the "kit". Recommended additional items (optional): 1 or 2 rubber pattern mats or rubber stamps (small jewelry sized images) (1) 6"...

l small shading hammer l diamond dril bit  lmm diameter l diamond drill bit   l.2-1.5 mm diameter l set of ten cheap diamond burrs l cheap diamond separating disc some silver solder (hard, medium, easy) general hand tools, flexshaft bits, etc. odd shaped stones (no...

Tool and Supply List: Scrap metal provided by CCA to the gain confidence you need to solder your own projects effectively. Students will be responsible for providing their own solder and hand tools (this includes all tools from Introduction to Silversmithing).

8" Diameter Cast Iron Bowl, filled with the Supporting Rubber Donut 1.5 kilos of Red German Pitch (availabe at Allcraft Jewelry Supply 1-800-645-7145) **NOTE: If you already have an 8" diameter cast iron bowl filled completely with "Northwest Pitch" (WITHOUT CEMENT)...

Metal finishing tools Optivisor or adequate magnification Standard ring clamp or GRS ring clamp Chasing hammer Multiple blue wheels (knife edge and flat edge) Mandrels for blue wheels Siliplum wheels and mandrels Level 1: #4 barrette needle file Level 2: #6 barrette...

Supply List: Kit fee: $25 to be paid to the instructor the day of the workshop. Kit will include resin and ring, bracelet or pendant with ready-made bezel. Old or new photos, the smaller the picture the better (will need to fit into an area that is less than 1-inch)....

Supply List: (1) 28 gram or 45 gram package PMC+ clay 1 container of PMC paste/slip 1 PMC syringe (PMC+ or PMC3) 1 piece 3x3 PMC sheet Your choice of synthetic (heat-treated) stones – cubic zirconium preferred (can be faceted or cabochons). 12 inches of 20g fine...

Materials needed for the 2-day workshop: travel size spray bottle for distilled water protective mask and goggles protective thin latex gloves scissors to cut sandpaper scotch tape small flathead screwdriver Small metal or plastic bowl for mixing clay apron &...

You will need all of the  supplies from the Level 1 supply list. 1  Chasing Hammer (talk with instructor regarding size on the first day of class) 1 Tapping Tool 1 #2 Barrette Needle File (this needs to be used for wax projects only) Standard Metal Finishing Tools...

Students should bring their favorite hand tools and the following: at minimum, (l) 3 x 6" sheet of 26 gauge reticulation silver In order to get the best quality and character of texture, Harold recommends that you order this from Hauser and Miller Co (You may wish to...

The following items with a star (*) are required for the first day of class: Jeweler's saw frame* Assortment of saw blades (2/0 to 6/0)* 24" of 14 gauge sterling silver round wire * 24" of 16 gauge sterling silver round wire* Particle mask* Safety glasses* Assortment...

Supply list: Jeweler's saw Assortment of small saw sizes ranging from 2/0 to 6/0 Sanding stick with assorted grits from 400 to 2000 Combination half-round pliers Assorted needle files: half round, barrette and round (#2 cut or finer recommended) Assorted blue wheels...

1 pair of ergonomic (long handled, padded) chain nose pliers 1 pair of ergonomic (long handled, padded) bent chain nose pliers Optional: 1 bracelet clasp (also available from instructor) 1 sterling silver chain (also available from instructor) The Instructor will...

1 pair of ergonomic (long handled, padded) chain nose pliers 1 pair of ergonomic (long handled, padded) bent chain nose pliers Optional: 2 bracelet clasps (also available from instructor) 1 pair of earring findings (also available from instructor)   The...

Tool and Supply List This list of tools includes in parentheses a RioGrande.com catalogue number and Rio’s current price. These catalogue listing numbers are to assist you when looking for the appropriate tools online and know clearly what is required. Please note:...

Required supplies: All tools from your Introduction to Silversmithing Class, which should include: needle files saw frame and blades ring clamp/vice sanding sticks with an assortment of sanding paper silcone wheels on mandrels (sillipum) steel hammer (if you have one,...

All tools (not stones and silver) from Introduction to Silversmithing class will be required. The following items listed below are specifically designed to supplement the tools purchased and used in the introductory class. The approximate cost for these tools and...

New! Intro Tool KitsCCA now offers an Intro Tool Kit to help new students get just what they need. Intro Kits include all required supplies* and run about $250 (price subject to change based on current metal pricing). Please contact the school at 303.429.1401 at least...