Supply List:
- (1) #23 raising hammer (the school will furnish the hammer for the first class)
- 1 solder pick
- (1) #1 or #00 half round economy file
- (1) #2 half round file (may use inside ring file)
- (1) 4, 5, or 6 inch jeweler’s saw frame
- assorted saw blades (at least 1 dozen each of 1/0 and 2/0)
- 8 sanding stick blanks
- 1 sheet each 220, 320, 400, 600, 1000, 1200, 1500 & 2000 wet/dry sandpaper
- 1 pair of ear plugs
- 1 pair of safety glasses
- 1 ultra fine line black Sharpie pen
- graph paper (very important! ten squares per inch)
- tracing paper
Project #1
- 6 inches of 6 gauge square sterling silver wire
Project #2
- 6 inches of 8 gauge square sterling silver wire
- 6 inches of 16 gauge round sterling sliver wire
- 3 inches of 14 gauge round sterling silver wire
Project #3
The following items are for the final project, if time permits. Do not buy these items until you have discussed them with your instructor.
- 1 medium size Delrin cross pein hammer (#17003)
- 1 extra large sinusoidal stake with gentle curve (#SIN-200)
- (1) 1×6 inch 20 gauge sterling silver sheet